Hose End Feeder for applying Nematodes

HEFD

New product

For use with Nemaslug, Vine Weevil Killer, Chafer Grub Killer and LeatherJacket Killer

More details

£13.99

- +

 
Description

This Hose End Feeder is ideal for applying Nemasys Nematodes.

It has been tested and approved for applying the Nematodes listed below by Nematodes Direct and can also be used for applying liquid feed to plants and lawns. It simply attaches via standard hose-pipe connector and features both a rose head and jet spray as well as an on / off switch for water flow.

Nemaslug application instructions using a Hose-end Feeder (40sqm & 100sqm) :-

  1. Mark out the area to be treated - 40sqm or 100sqm.
  2. Wash the feeder through with water to ensure it is clean.
  3. Add entire contents of the pack to the bowl of the feeder.
  4. Fill the bowl with water before attaching the hose.
  5. Taking care to keep the feeder in an upright position apply evenly to the whole of the area for 8 minutes using a side-to-side motion to keep the nematodes well mixed.
  6. During this time most of the nematodes will have been applied.
  7. Treat the same area again for a further 8 minutes to apply the remaining nematodes as well as to make sure they are adequately watered in.
  8. Adhering strictly to the application timings will ensure that any remaining colour in the bowl will be due to inert carrier only and that you have performed an even application.

 

 

Nemasys® Vine Weevil Killer application instructions using a Hose-end Feeder (Large Packs) :-

  1. Mark out area to be treated.
  2. Wash the feeder through with water to ensure it is clean.
  3. Add entire contents of the pack to the bowl of the feeder.
  4. Fill the bowl with water before attaching the hose.
  5. Taking care to keep the feeder in an upright position apply evenly to the whole of the area for 8 minutes using a side-to-side motion to keep the nematodes well mixed. During this time most of the nematodes will have been applied.
  6. Treat the same area again for a further 8 minutes to apply the remaining nematodes and make sure they are well watered in.
  7. Adhering strictly to the application timings will ensure that any remaining colour in the bowl will be due to inert carrier only and that you have performed an even application.

 

 

Nemasys® chafer grub and Nemasys Leatherjacket killer application instructions using a Hose-end Feeder (100 sqm pack) :-

  1. Mark out area to be treated.
  2. Wash the feeder through with water to ensure it is clean.
  3. Add entire contents of the pack to feeder bowl.
  4. Fill the bowl with water before attaching the hose.
  5. Taking care to keep the feeder in an upright position apply evenly to the whole of the area for 8 minutes using a side-to-side motion to keep the nematodes well mixed. During this time most of the nematodes will have been applied.
  6. Treat the same area again for a further 16 minutes to apply the remaining nematodes as well as to make sure they are adequately watered in.
  7. Adhering strictly to the application timings will ensure that any remaining colour in the bowl will be due to inert carrier only and that you have performed an even application.
  8. Make sure the lawn does not dry out after applying nematodes and keep it well watered for at least two weeks. THIS IS VERY IMPORTANT!

 

 

Nemasys® chafer grub and Nemasys Leatherjacket killer application instructions using a Hose-end Feeder (500 sqm pack) :-

  1. Divide the 500 sqm to be treated into 100 sqm areas.
  2. Wash the feeder through with water to ensure it is clean.
  3. Divide the pack into 5 equal portions.
  4. Add 1 portion i.e. a fifth of the pack to feeder bowl. Then fill the bowl with water before attaching the hose.
  5. Taking care to keep the feeder in an upright position apply evenly to 100 sqm for 8 minutes using a side-to-side motion to keep the nematodes well mixed. During this time most of the nematodes will have been applied.
  6. Treat the same 100 sqm area again for a further 8 minutes to apply the remaining nematodes as well as to make sure they are adequately watered in.
  7. Repeat the procedure with the other 4 portions treating each 100 sqm area.
  8. Adhering strictly to the application timings will ensure that any remaining colour in the bowl will be due to inert carrier only and that you have performed an even application.
  9. Make sure the lawn does not dry out after applying nematodes and keep it well watered for at least two weeks. THIS IS VERY IMPORTANT!




Nemasys® chafer grub and Nemasys Leatherjacket killer application instructions using a SPRAYER  (500 sqm pack)

  1. Mark out area to be treated and irrigate well so that the area to be treated is moist
  2. Wash the sprayer through with water to ensure it is clean.
  3. Add entire contents of the pack to a bucket and add 10 litres of water. Stir the solution well.
  4. Take 2 litres of the concentrated solution and add to the sprayer and add another 10 litres of water. Stir well again.
  5. Apply the contents to 100 sqm. Once the sprayer is empty, repeat the process another 4 times until you have treated 500 sqm in total.
  6. Irrigate the treated area directly after application with upto 3mm of water.
  7. Make sure the lawn does not dry out after applying nematodes and keep it well watered for at least two weeks. THIS IS VERY IMPORTANT!

 

 
Customer Reviews

Hose End Feeder for applying Nematodes rated 4.8 out of 5 based on 60 reviews.

Menu

Top